- No products in the cart.
Maharashtra Multi Distributors Ltd was started as a distributing company for Vanaz products and Bottled Gas products in 1990. Since then we have been marketing various products for several companies to direct customers and dealers all over India and abroad.
In 1991 we had a modest repertoire of products which today has mushroomed to more than 500 products encompassing the entire range of gas instrumentation i.e. Burners, FRS, Commercial Equipment, Fittings, Gas Flow Meters, Pigtails and Hoses, Torches, Valves and Vanaz Products.
Rather lose money than the confidence of customer
We promise only what we can deliver. Then, deliver more than what we have promised…
Inlet Pressure Range 1-19 kg/cm2
Outlet Pressure Range 0.5-10 kg/cm2
Gas Flow Rate 150 Nm3/hr.
End Connection 1” Flanged #150 R2323
1” Flanged #300 R2323ii
Gas LPG, Natural Gas and Nitrogen
The FMG series of rotary gas meters is designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters fully comply with the EN12480 and OIML R137. A compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. The aluminum casing (body and cover) is designed for working pressures up to 21 bar (300 psi) with a safety factor of 5. Square impellers and improved positioning of main bearings and shafts makes the meter less susceptible to overload and pressure shocks.
An aluminum index and protection of the LF pulsers with the associated magnets helps prevent manipulation of the meter by externally applied magnets or other external forces. Tampering of meters with strong neodymium magnets is a major concern of utility companies in many parts of the world.
This type of manipulation is very difficult to detect and or prove, therefore, prevention of such actions is the best cure. Further, in order to be prepared for the smart grid, the index can be equipped with an intelligent encoder. A unique proprietary oiling system, where-by the oil is distributed directly to the timing gears by means of a disc, eliminates oil loss at high impeller speed and will lubricate the timing gears at very low loads. All plugs and oil sight glasses are in the front of the meter, allowing the meter to be installed in very compact installations.
ENCODER / MULTIPLE CONNECTORS / MULTIPLE THERMO WELLS / TOTALLY
SEALED / INSTRUMENT DRIVE / SIDE READING
Technical details on demand
DN40 DN150 (1-1/2 6)
PN16, ANSI150, ANSI300
0,5 650 m3/h (17 23.000 acfh)
MID, PED, ATEX approved
LOW SENSIVITY TO INSTALLATION STRESS EASY LOCAL REPAIR
INTEGRATED THERMO WELLS
TAMPER PROOF INDEX
CLASS 1 OR CLASS 1.5
Inlet Pressure Range 1-161 kg/cm2
Outlet Pressure Range 0.5-8 kg/cm2
Gas Flow Rate 25 Nm3/hr.
SRV set at 12 kg/cm2
End Connection Inlet: To suit outlet of std. cyl. valve outlet as per IS:3224
Outlet: Nozzle to suit 6mm l.D. hose pipe
Gas Carbon Dioxide, Oxygen, Hydrogen, Air, Nitrogen, Argon.
Model supplied will be without pressure gauge
Also available in 1/2″ BSP (F) and union nut on request
Outlet pressure upto 15 bar available on request.
Technical details on demand
Shawarma Machine and other Commercial Equipments manufacturer in Pune Maharashtra
Design Standard: IS 9890-1981?
Pressure Testing: BS 6755 Part I/API 598/IS 6157-1981
Flange Dimensions: ANSI B 16.5 ASA 150?
Face to Face: ANSI B 16.10./IS 9884-1981
Available in CS and SS CF 8 Body
Burner no. 2942: Burner neck tube provides broad powerful blow lamp flame for outdoor soldering
Burner no. 5: Burner neck tube these are commonly used for a longer and more powerful blow lamp flame. These are ideal for straightening and bending plates, pipes and bars, pre heating in welding and large brazing jobs etc.
Burner no. 6: Burner neck tube it offers a powerful flame with a large heating content, for piping and sheet metal work requiring a great deal of heat for drying molds, thawing jobs, asphalt work and for metal melting.
Hand torch: Hand torch regular torch that is made with bake lite. Handle with grip so it that can hold torch for long period without tiring or burning hands. Straight needle valve and brass knob to control the flame of the burner, suitable for long flame burner, specially for heating, melting, soldering purpose.
Part Number: 1106
Cast Iron Dum Biryani Burner.
Standard and customised Dum Biryani Burner.
2 Rated operating pressure: 320 to 490 gm /cm² (4.5 psig)
Consumption at rated inlet pressure: 11,000 Kcal/h
Consumption in kg/hrsKg/h: 1.0
Inlet connection : 3/8 BSP compression.
Available in 1, 2 or 3 rings with individual or common control