Sort By:
View:
  • ST type Models: (Part no . 1080 – 1087)
    These burners produce short turbulent oxidizing flames ideal for high intensity weld preheating, wherever hydrogen cracking is to be avoided. It can also be used as an immersion heater or a space
    heater where secondary air is low. These burners can be made in longer lengths.

    S type Models:(Part no . 1090 – 1097)
    These burners produce long, reducing, low velocity flames for an excellent transfer efficiency in heating dies, moulds, plates, castings and large fabricated components. These burners can be made in longer lengths.

  • Indian and imported makes. Automatic and Non-Automatic.
    Similar models can be manufactured as per customers sizes and specifications. The inside combustion chamber could be fabricated with nichrome mesh or ceramic tile.

  • Ideal for tea stalls, snack-bars, pavbhaji. Sturdy cast iron body fitted with adjustable screws for supporting utensils of various shapes. Control tap with safety push-in arrangement.

    Specifications:
    Operation Pressure : 30gms/cm² to 300gms/cm
    Consumption: 450gms/hr to 1000gms/hr
    Connection: Nozzle to suit 6.4 mm tube or 3/8” BSPM

    Low Pressure with gas cock as well as Medium Pressure/High Pressure with needle valves.
    These canteen burners are also available with prefabricated stool type supports.

  • Specifications:
    2 Rated operating pressure: 320 to 490 gm /cm² (4.5 psig)
    Consumption at rated inlet pressure: 11,000 Kcal/h
    Consumption in kg/hrsKg/h: 1.0
    Inlet connection : 3/8” BSP compression.

    Available in 1, 2 or 3 rings with individual or common control

  • Similar models can be manufactured as per customers sizes and specifications. The inside combustion chamber could be fabricated with nichrome mesh or ceramic tile.

  • Part Number: 1106

    Cast Iron Dum Biryani Burner.

    Standard and customised Dum Biryani Burner.

  • Apart from the standard models listed above, these burners can be supplied in any Ribbon Length from 75mm to 400mm (3” to 15.75”). Side entry or bottom entry. Also made as per customers individual design and specifications

  • (High Heat Output, Flame Spreading Ring, Burner)

    These burners are recommended to be used at 320 to 490 gm/cm² (4.5 psig), however this may be increased by 50%; the heat output being varied accordingly.

  • Gas operated Infra Red Radiant Burners (can be adapted to radiant heat if required). Industrial uses include brooding, curing, drying, food processing, almost all purposes where metal fabricating and
    finishing, textile drying and weld pre-heating. Also available in longer length. This item is also available in as per customer requirement .

  • These burners are made as per customers specifications and sizes specially for Shwarma machines, drying conveyor belts and special applications for roasting and printing preheating etc.

  • Multipurpose Canteen Burners
    (Medium Pressure)

  • Burner Model Nos. RV-1 (300) RV-2 (600) RV-3 (900) RV-4 (1200) Idealfor use in Restaurant and Hotels, under the Hot Plate for preparation of pancakes, hamburgers, dosa, omelettes, chapatis, etc. Useful for
    hot cases, drying ovens, bain maries and tin bath heating in industries. Produces two linear flames with wider heat distribution. Flame stability, increased efficiency and long life ensured by stainless
    steel corrugated ribbons.

    Available in four sizes providing different flame lengths.

    Specifications:
    Rated operation pressure: 320 to 490 gm/cm² (4.5 psig)
    Connection 3/8” BSP Compression Inlet. The above burners are
    available in side loading and bottom loading models. Both in two
    ribbons and single ribbon. Also available in pencil models.

    L TYPE
    Apart from the standard models listed above this burner can be supplied in any ribbon length upto a maximum of 2100mm (83 ins). Single Flame Ribbon Burner (L Type).
    We can also make them as per customers design and specifications.

  • Most appropriate for heavy heating requirements of commercial cooking and industries: General & Pharmaceuticals and Dairy. Produces lovely blue Sunflower shaped flame; available in two capacities.
    These burners are recommended to be used at a pressure of 320 gm/cm² (4.5 psig), however this may be varied by ± 25%; the heat output being varied accordingly.
    These burners are also known as M-22 or M-1 and M-35 or M-2 . Also available in model M50 & M78.

  • Ideal heavy-duty burners for bulk frying and general heating requirements of industries and pharmaceuticals, produce powerful torch type blue flames. Available in two capacities.
    These burners are recommended to be used at a pressure of 320 to 490 gm/cm² (4.5 psig), however, this may be varied by ±25%; the heat output being varied accordingly.

  • Ideal heavy-duty burners for bulk frying and general heating requirements of industries and pharmaceuticals, produce powerful torch type blue flames. Available in two capacities.
    These burners are recommended to be used at a pressure of 320 to 490 gm/cm² (4.5 psig), however, this may be varied by ±25%; the heat output being varied accordingly.
    These burners are also termed as T-22 or T-1 and T-35 or T-2. Also available in model T50, T78.